Designed with micro-computer control system, this evaporative air cooler can
lower surrounding temperature and humidify the air through the principle of
water evaporation. Provides versatile and economical way to cool and humidify
your immediate surrounding. Feature 3-D Cooling Pad and rotating louver for
added cooling and air distribution. The Cooler easily rolls from room to room
and can also be used as a fan or humidifier if temperature is not an issue. The
remote control allows you to easily change settings.
The Air Cooler works by endothermic reaction (a reaction that consumes heat),
which sucks air through it 3-D Cooling Pad (saturated with water). As the air
flows through the pad, some of the water evaporates into the air, consuming the
heat that was in the air. An air stream is then blown out the front of the unit
and is considerably cooler than the current room temperature! This is not an air
conditioner and therefore uses much less energy.
The 3-Dimensional Cooling Pad is made of cellulose paper, impregnated with
unique ingredients for high performance and structural strength. Treated with
special stiffening and wetting agents for maximum water absorption and
retention; and with Anti-Rot chemical for prevention of algae and bacteria
growth. Due tot he 3-dimensional weaving structure, the cooling pad allows
longer contact between air and water.
Note: The unit works well in dry climates; not very effective in areas with high
humidity as the unit utilizes water to cool.
Benefit:
Environmental Friendly uses no freon and compressor
Uses ice and water to cool
Washable Photocatalystic Filter
With Remote Control
Features and Functions
- Computer-controlled system with LED panel
- Fan, Cool, Humidifier, Air Filtration and Ionizer
- 3-Dimensional Cooling Pad
- Remote control
- Washable filter
- Three air speeds: H / M / L
- Three fan modes: Normal / Sleep / Natural
- Timer: from 0.5 ~ 7.5 hours setting
- Extreme-silent motor
- ETL
Specifications:
Input voltage 120V / 60Hz
Power consumption 65 W
Max air volume >20m3/min
Water consumption 0.5 ~ 0.6L/Hr
Fan speeds 5.0 m/s
Ion density 2,800,800 ~ 3,000,000/CM3
Unit dimension (W x D x H) in. 14.5 x 9.5 x 28.25 in.
Package dimension (W x D x H) in. 16.5 x 13.5 x 33 in.
Net weight 16.5 lbs
Designed with micro-computer control system, this evaporative air cooler can
lower surrounding temperature and humidify the air through the principle of
water evaporation. Provides versatile and economical way to cool and humidify
your immediate surrounding. Feature 3-D Cooling Pad and rotating louver for
added cooling and air distribution. The Cooler easily rolls from room to room
and can also be used as a fan or humidifier if temperature is not an issue. The
remote control allows you to easily change settings.
The Air Cooler works by endothermic reaction (a reaction that consumes heat),
which sucks air through it 3-D Cooling Pad (saturated with water). As the air
flows through the pad, some of the water evaporates into the air, consuming the
heat that was in the air. An air stream is then blown out the front of the unit
and is considerably cooler than the current room temperature! This is not an air
conditioner and therefore uses much less energy.
The 3-Dimensional Cooling Pad is made of cellulose paper, impregnated with
unique ingredients for high performance and structural strength. Treated with
special stiffening and wetting agents for maximum water absorption and
retention; and with Anti-Rot chemical for prevention of algae and bacteria
growth. Due tot he 3-dimensional weaving structure, the cooling pad allows
longer contact between air and water.
Note: The unit works well in dry climates; not very effective in areas with high
humidity as the unit utilizes water to cool.
Benefit:
Environmental Friendly uses no freon and compressor
Uses ice and water to cool
Washable Photocatalystic Filter
With Remote Control
Features and Functions
- Computer-controlled system with LED panel
- Fan, Cool, Humidifier, Air Filtration and Ionizer
- 3-Dimensional Cooling Pad
- Remote control
- Washable filter
- Three air speeds: H / M / L
- Three fan modes: Normal / Sleep / Natural
- Timer: from 0.5 ~ 7.5 hours setting
- Extreme-silent motor
- ETL
Specifications:
Input voltage 120V / 60Hz
Power consumption 65 W
Max air volume >20m3/min
Water consumption 0.5 ~ 0.6L/Hr
Fan speeds 5.0 m/s
Ion density 2,800,800 ~ 3,000,000/CM3
Unit dimension (W x D x H) in. 14.5 x 9.5 x 28.25 in.
Package dimension (W x D x H) in. 16.5 x 13.5 x 33 in.
Net weight 16.5 lbs
Designed with micro-computer control system, this evaporative air cooler can
lower surrounding temperature and humidify the air through the principle of
water evaporation. Provides versatile and economical way to cool and humidify
your immediate surrounding. Feature 3-D Cooling Pad and rotating louver for
added cooling and air distribution. The Cooler easily rolls from room to room
and can also be used as a fan or humidifier if temperature is not an issue. The
remote control allows you to easily change settings.
The Air Cooler works by endothermic reaction (a reaction that consumes heat),
which sucks air through it 3-D Cooling Pad (saturated with water). As the air
flows through the pad, some of the water evaporates into the air, consuming the
heat that was in the air. An air stream is then blown out the front of the unit
and is considerably cooler than the current room temperature! This is not an air
conditioner and therefore uses much less energy.
The 3-Dimensional Cooling Pad is made of cellulose paper, impregnated with
unique ingredients for high performance and structural strength. Treated with
special stiffening and wetting agents for maximum water absorption and
retention; and with Anti-Rot chemical for prevention of algae and bacteria
growth. Due tot he 3-dimensional weaving structure, the cooling pad allows
longer contact between air and water.
Note: The unit works well in dry climates; not very effective in areas with high
humidity as the unit utilizes water to cool.
Benefit:
Environmental Friendly uses no freon and compressor
Uses ice and water to cool
Washable Photocatalystic Filter
With Remote Control
Features and Functions
- Computer-controlled system with LED panel
- Fan, Cool, Humidifier, Air Filtration and Ionizer
- 3-Dimensional Cooling Pad
- Remote control
- Washable filter
- Three air speeds: H / M / L
- Three fan modes: Normal / Sleep / Natural
- Timer: from 0.5 ~ 7.5 hours setting
- Extreme-silent motor
- ETL
Specifications:
Input voltage 120V / 60Hz
Power consumption 65 W
Max air volume >20m3/min
Water consumption 0.5 ~ 0.6L/Hr
Fan speeds 5.0 m/s
Ion density 2,800,800 ~ 3,000,000/CM3
Unit dimension (W x D x H) in. 14.5 x 9.5 x 28.25 in.
Package dimension (W x D x H) in. 16.5 x 13.5 x 33 in.
Net weight 16.5 lbs
Limited 1 Year Manufacturer WarrantyThis item falls into our: Standard Return Policy |
